1. How to Build

SimCenter tools all comprise a frontend UI and some backend applications. They are kept in separate GitHub repositories and are also built separately. The following3 sections outline (1) the applications needed to build and run, (2) instructions for building the backend applications, (3) instructions for building the frontend UI, and (4) operations to perform in the running UI to link the UI and the backend.

Note

As part of our continuous integration process, R2D app is built evrey time we check code into the NHERI-SimCenter repositories. To do this we make use of a CI service. That current service is appveyor. As a consequence in the R2D app repo that you will clone as part of this build process there is a file appveyor.yml. This file contains shell commands that are issued to set-up the operating system, download the software and build it. If the following commands fail for you, look at the appveyor.yml file to see what commands are currently beeing called as these may be more up to date than what is presented below.

1.1. Install Dependencies

First, ensure the following dependencies are installed:

  • C++17 compliant compiler: many of the workflow applications included use C++17 features; consequently, they may need a newer C++17 compliant compiler. For Windows users, MSVC in Visual Studio (Community Edition) can be used. Some extensions of Visual Studio are also needed: Open Visual Studio Installer, go to Installed / More / Modify, under the Workloads tab, check Desktop development with C++ and Visual Studio extension development; under the Individual components tab, check C++ CMake tools for windows. Then click Modify.

  • OpenSees: The workflow applications require an installation of OpenSees to carry out a structural analysis using the finite element method.

  • DAKOTA: The workflow applications require an installation of DAKOTA to handle and propagate the uncertainties defined in the input files for the workflow applications.

  • Python: The workflow requires at least Python 3.7.

  • Conan: This repository uses Conan for dependency management. Conan is a python library and can be installed using the following instructions. Version 1.25 or later is recommended.

  • CMake: This repository uses CMake for managing the build process. Version 3.15 or later is recommended.

  • Qt: Qt is free for open source developers. Version 5.15 or later is required. Make sure to include Qt Creator in the installer.

Warning

Qt Version 6.0 is currently available. It is so new we do not use it.

1.2. Build the Backend Applications

Instructions to build the backend workflow applications on your local desktop depend on your operating system, but is a 2 step process involving some initial setup and finally the build.

1.2.1. Setup the development environment with Conan

  1. Add Conan SimCenter to the Conan remotes. You can add these remotes by typing the following commands in the terminal:

    conan remote add simcenter https://nherisimcenter.jfrog.io/artifactory/api/conan/simcenter
    
  2. Create a default Conan profile if this is the first time you use Conan for building packages.

    conan profile new default --detect
    
  3. Check the default profile of your build environment using:

    conan profile show default
    
  4. If the compiler name and compiler version are not listed, you will need to select a specific compiler. For instance, on Windows using Visual Studio 2019, you can specify the compiler as follows:

    conan profile update settings.compiler="Visual Studio" default
    conan profile update settings.compiler.version="16" default
    

1.2.2. Build the applications

  1. Obtain the code in the SimCenterBackendApplications repository from Github. You can do that by using your preferred Git client/GUI or by using the git clone command in the terminal:

git clone https://github.com/NHERI-SimCenter/SimCenterBackendApplications
  1. To build the applications you need to now navigate to the SimCenterBackendApplications folder that was created with the git clone command. Once there you will issue the following set of commands to create a build folder, change director to that folder, install needed software using conan, and finally use cmake to build and install thge applications. The following are the set of commands to type in the terminal (see notes below the code block if the commands fail).

For those developers using the Windows operating system, in a terminal or powershell window you need to type the following:

mkdir build
cd build
conan install .. --build missing
cmake .. -G "Visual Studio 16 2019"
cmake --build . --config Release
cmake --install .
cd ..

On Windows, it is necessary to specify a compiler for CMake. To do this, you need to add additional arguments to line 4, i.e., if you have Visual Studio 2019, you would instead type:

mkdir build
cd build
conan install .. --build missing
cmake ..
cmake --build . --config Release
cmake --install .
make install .
cd ..

Note

  1. For Mac users running Big Sur and version 12 of XCode there are some reported issues. Replace line 3 above with the following two lines:

    conan install .. --build missing --build=libcurl
    mv ./missing/* ./
    
  2. For Mac users, add the following command after cmake –install . to ensure the binary applications are copied to the applications folder.

    make install .
    

If building and installation were successful, you should find a folder called applications in the repository with all the applications inside of it. The name of this folder should not be changed.

1.3. Build the User Interface

To build the interface, you first need to download the repo and a companion repo(SimCenterCommon) from Github using our github repos. In a folder in which you wish to build the application, issue the following two commands.

git clone https://github.com/NHERI-SimCenter/SimCenterCommon.git
git clone https://github.com/NHERI-SimCenter/R2DTool.git

Note

Use the above links if you just want to download and build the applications. If you intend to make changes to any of the code in the repo’s, you should fork that repo and then clone your forked repo. Forking a repo at github is done through your browser as shown on the following github guides page

You now have two ways to build the application: (1) using the Qt Creator desktop application provided by Qt and (2) from terminal application.

  1. Start Qt Creator, then open the R2D.pro file located in the R2D directory that was downloaded in the previous step.

  2. Setup the development kit in Qt Creator. This is usually done by selecting the Qt version, compiler, and configuration and following the onscreen dialog.

  3. Build the application and run it in Qt Creator IDE using the Run button. This can be done using the keyboard shortcut F5 to build and start the tool.

The operations are similar to what was done when building the backend applications. In the terminal application, starting inside the directory of the cloned application again, you will create a build directory, cd into that build directory, run qmake, and finally make (or on Windows nmake) to create the application.

Windows developers will type the following in a terminal or a powershell window:

mkdir build
cd build
conan install .. --build missing
qmake ..|short tool id|.pro
nmake

Linux or Mac users will type the following in a terminal window from inside the R2D app directory:

mkdir build
cd build
conan install .. --build missing
qmake ../R2D.pro
make

Note

  1. qmake is an application installed with Qt. To be able to run the command as known, the path to the Qt bin folder needs to be added to your PATH environment variable. Alternatively, you need to specify the full path to qmake, i.e., on my desktop (if I had not set my PATH variable). I would replace line 3 with the following:

    /Users/fmckenna/Qt/5.15.2/clang_64/bin/qmake ../R2D.pro
  2. On a Windows 10 with Visual Studio, the above commands need to be performed using a Visual Studio x64 command prompt .

  3. If installed, jom can also be used to build in parallel.

Once built, you can now run the tool executable.

1.4. Modify the User Interface Preferences

Once built, the tool Preferences needs to be modified. To do this, open the R2D tool, then click on File -> Preferences in the main menu if on Windows or R2D -> Preferences if on a Mac. This will bring up a dialog window shown below. You need to modify specific values:

  1. Python: provide the full path to the python interpreter.

  2. OpenSees: provide the full path to the OpenSees executable

  3. Dakota: provide the full path to the Dakota executable.

  4. Custom Local Application: Here, select the checkbox to the left, and then provide the path to the SimCenterBackendApplications directory. The code assumes that the folder applications, which you created when building the backend applications, exists.

../../../../_images/Preferences.png

Fig. 1.4.4 Preferences Dialog